The One thing 97% of Gun Owners Forget to Address…
Attention Fellow Patriots...
...Is This Little-Known Secret Killing The Accuracy of Your Firearm?
Family, Food, Water and Shelter…
Most of us have the essentials covered, but in recent months - we’ve noticed a
disturbing problem throughout our community...

Few firearms are prepared as they need to be.

Whether it’s harmful warping that happens after firing multiple rounds or normal 
wear and tear that destroys accuracy…

Have you taken the steps to ensure your trusted sidekick is ready?
With a Traditional Barrel, We Fear the Answer is NO
We’ve all experienced what happens to a firearm after a lot of use and little time for care. Not only is your accuracy not as sharp as it needs to be, but a jam is most likely around the corner. 

This is bad enough when you have a 12-pointer in the crosshairs and can’t drop him, but what if it happens at a time where you really need it?

We’d all like to think we’ll be safe forever and never have to worry about that moment…

But with the never-ending shit show happening in our government today, it’s hard to know anything for sure anymore. And I know since you’re here right now, you’re smart enough to understand the importance of protection and security. 

Not only is your firearm the only thing you can count on to protect your family, but it’s also an essential item that can provide survival in other ways - such as hunting down a tasty meal that’ll be a godsend after eating canned foods for 30 days...

Know what I mean? 

If so, then I’d like to tell you about a simple solution that’ll take care of these problems and ensure you’re fully ready for any situation…
The Advanced Solution That Instantly Increases the Lifetime and Accuracy of Your Firearm
How?

By using computer-controlled cryogenic processing that’s been carefully modified to permanently eliminate barrel stress and give you a (homogeneously) stabilized barrel.

This happens after we put your current gun barrel through the cryo-accurizing system, a process that we originated the patent on. Our process takes your firearm to temperatures of - 300°F and at this point - we’re able to rearrange molecular structures of your gun barrel and ensure uneven stress patterns are relieved (while also being prevented for years to come). 

- 300°F is above the boiling point where liquid becomes a gas and is completely SAFE for your firearm and will NOT create thermal shock. This is controlled science and well, you can't just dunk a firearm barrel into liquid nitrogen. You need the computer controlled process which we originated the patent on to ensure the results on your firearm! 
Before and After Cryo Processing
BEFORE: 
Molecular structure formation with  flaws from out of phase solidification
AFTER:
Denser, realigned molecular structure resulting from cryogenic processing
Actual group from AR-15 with iron sights at 100 yards
Actual group from 30-06 Hunting Rifle at 100 meters
Actual group from Remington 700, 24X Leupold Scope 100yds
Sounds Great, But What Exactly does that do for Me?
  •  Extends the life of your barrel by 100%....a simple, yet incredible feature that’ll benefit you for years to come (literally)...
  •  Significantly increases the accuracy of your barrel, something that’s been proven by countless studies and instantly provides you with a 50% better group (if not better)
  •  Makes your firearm extremely easy to clean, giving it an (even longer) life, (even better) accuracy and doing all this while avoiding the dreaded jam...
Real Results From Real Users...
"I Can Finish One 20 Shot String, Change Targets & Still Thread My Next Shot Solidly in the ten ring..."

300 Below treated my heavy Anschutz barrel, Match 54. In the past, my rifle would shoot well once its barrel was warmed up, but during qualification, that made competition dicey at times. If I had to hold up for a wind change during an international tournament, I could not go back to the sighter bull to warm my barrel back up. If my barrel cooled down, I could count on my first shot being out, high and right. 

My crap shoot: would it take one or two shots for it to come back in?

After 300 Below’s Cryo Accurizing treatment, this tendency to shift when warming up seems to be gone. I can finish one 20 shot string, go down, change targets and get back in position 10+ minutes later, all while still threading my next shot solidly into the ten ring.

I am attaching some results for you to amuse you. These targets were fired from an ISSF legal prone position


Paul Borthwick
Glenelg, Maryland
Results From River Rock Arms Sales Manager

Our shooter was verifying long distance (600 yards) 1/4 MOA accuracy out of one of our new (2016 model) National Match rifles, with 20” 416 stainless steel, 1:8 twist, using barrels cryo’d by you. This is a production rifle, not purpose-built for testing.


Steve Mayer
LE / Govt Sales Manager
Rock River Arms
"I Am Sold On The Process & Recommend It Highly"

I bought a Winchester M70 in .243 win back in 1991. After much frustrating load development, the best I could make it shoot was .712 for 5 shots at 100 yards.

I heard about 300 Below in Precision Shooting Magazine and sent my barrel in for treatment. After getting the barrel back and reassembling my rifle, I proceeded with more load development and wound up with a load that shot .381 for 5 shots at 100 yards. 

After 2,150 rounds and 18 years later, my rifle still shoots .430 for 5 shots at 100 yards and cleaning is much easier. Over 2000 rounds of steel loads is more than any .243 should last.
I am currently having a .300 Winchester Mag. done by 300 Below. I am sold on the process and recommend it highly


Andy Sorrell
Schenectady, New York
"I Am So Glad To Have 300 Below Treat My Barrels!"

Very satisfied with my improved groupings. After seasoning the stainless DPMS barrel, I had 300 Below’s Cryo Accurizing process applied to my barrel. As usual, it came back in perfect condition, just as did my other 2 barrels that 300 Below treated in the past.

I only needed to take 5 or 6 shots to get it dead on at 50 yards.  My next 2 shots at 100 were left and low.

My last 2 were center and low, as shown in the picture.

This was shot from a seated position but not sand bagged. I have seen AR’s that cost 3-4 times the amount that I paid for mine that I built, and they shoot downrange with larger groupings.

I am so glad to have 300 Below treat my barrels!
Very professional, with a fast 72 hour turnaround. 


Tim Overby
Pinnacle, North Carolina
"I Cannot Truly Believe How Great My Rifle Shoots After Treatment!"

Wow I cannot truly believe how great my rifle shoots after treatment! I was so frustrated.... the first shot fired out of my rifle would be on target; all shots fired straight after were from 50mm to where ever, if you could find them. Once my rifle cooled for 15 mins or so, the first shot was back on target. Some ammo shot high, some shot low, and you had to remember what was loaded while allowing 2-3 inches high or low-- what a pain!

I searched the net to find 300 Below had the best reports and info, so I sent my barrel to them. I must say what fantastic help and excellent communication, even with a customs glitch here in New Zealand.

Now as you can see from my targets, the new grouping is very good and close, even using three different types of ammo.

Why did I need such good results? Because I head shoot or neck shoot everything out to 400 meters. Most deer are shot at 50-100 meters using ballistic tip ammunition. My Rifle is a Zastava .223 with a Norico 3-9x40 scope. My dog is Walter; he’s never lost an animal yet.


Keith Blackie
New Zealand
"What The Treatment Did To A Couple Of Previously Ho-Hum Barrels Was Amazing"

I’ve now had six barrels treated ... and every confounded one of them has shot better after the treatment. What the treatment did to a couple of previously ho-hum barrels was amazing.


Merrill Martin, Writer
Precision Shooting
"Cryo Accurizing Process Worked Great For Me!"

300 Below’s Cryo Accurizing process worked great for me!! I have more and will have lots more targets looking like this later in the year if you would be interested.


L. David Whitehead
Bellefonte, Pennsylvania
"I Am Happy With The Results And Feel I More Than Got My Money’s Worth"
I sent an Imbel gear-logo receiver with about 6,000 rds  through it, and Imbel 18” chrome-lined barrel that was NIW when I bought it, but had about 3,000 rds through it when I sent it off. The barrel, receiver, handguard ring, front sight block, and Moses Hurricane flash hider were all sent and processed as one unit. The finish was Gunkote over fresh parkerizing (3-6,000 rds ago), and the process did not damage the finish at all. 

I am happy with the results and feel I more than got my money’s worth. In summary, I did see a marked increase in accuracy, and reduction in zero shift. 

With some of the barrels your company has done for my clients they have reached out to 2,000 yards on prairie dogs. Matter of fact, our longest has been 2,056 yards and my personal record has been 1,883 yards. 
Now we all know there’s a lot that goes into shooting a pop bottle sized object at that distance, but a good barrel has a lot to do with it.
On normal shooters they are putting 300 to 600 rounds a day down range in 80° to 95°, and without 300 Below’s cryogenic treatment, staying true on target would not happen. So, to you and your great employees and fantastic company, congratulations on 50 years.

Justin Lesser
Wyoming High Plains Safaris, LLC
Why This "WOULDN'T" Be For You
  •  You really DON'T care about accuracy
  •  Your shots are ALWAYS taken less than ten feet away
  •  You're a cityslicker who never fires or cleans your weapon
  •  You OWN a Rock River AR 416SS rifle (it's already factory-treated by us :)
Is This For You?
As a fellow gun owner, we know this is a no-brainer for you.

Every one of us understands the importance of protection and security…

But what most don’t realize is what type of firearms are subject to these harsh conditions.

It seems like everybody understands the harmful warping that can happen to an AR, maybe even the 30-06…

But few understand that it can actually happen to any type of firearm...

And that’s why we’ve designed our system to cover every type of barrel.

With over 500,000 firearms under our belt and more experience than we know what to do with…
Our incredible system is designed to handle any type of firearm, including:
  •  Handguns
  •  Shotguns
  •  Rifles
  •  Machine Guns
  •  And any other form of heat you might have...
How it Works...
After processing over 500,000 firearms… We’ve had enough time to create an amazing system that not only makes your life easy but ensures full protection of your firearm and puts it back in your hands quicker than you might think.
STEP #1
Place Your order and a prepaid container will be sent out immediately
When it comes to shipping your firearm, there are 2 immediate concerns that come to mind:
#1. How do I know my firearm won’t get dinged up along the way?
#2. And how do I even ship a gun in today’s world?
Thankfully we’ve found a way to address both of these concerns, and we do so by sending out a specialized container that not only secures your firearm… But also shows any curious eyes that it’s going to a secure location, letting them know they need to keep their grubby hands off and let it continue on its way. Oh, and on top of that… These packages are pre-postaged as well, meaning you don’t have to worry about shipping and/or talking to the postman.
STEP #2
Place Your firearm in the container and send to the processing center
A few days after placing your order, the trusted container will arrive on your doorstep… And once that happens, just place your firearm in the secure container and send it on its way. As I mentioned in the first step, the postage is already paid so there’s nothing else you need to worry about at this stage.
STEP #3
 Allow 72 hours for processing, enjoy the lifetime of benefits
After your firearm is received by the processing center and enters the cryo-accurizing system, it only takes a short 72 hours before your new barrel is ready and on its way back to your doorstep. It’ll arrive in a secure container (similar to the one you sent out) and once it’s received, all you need to do is...
Enjoy A Lifetime Of...
  •  Incredible accuracy
  •  Iron-like toughness
  •  A gun so easy to clean, you'll think it's never been fired…
Are You Ready to Give Your Firearm the Treatment it Needs?
For a small-one time investment of $149 (shipping included), we’ll set you up with a lifetime of rewards
What Our Customers Have to Say:
And Yes, It’s Completely Backed By An Unconditional Guarantee
What Are You Waiting For?
No risk and a lifetime of rewards…
Can you afford not to give your firearm the treatment it needs?
For a small-one time investment of $149 (shipping included), what do you have to lose? 
Frequently Asked Questions...
Will this process damage my firearm?
No. 300 Below's cryo-accurizing treatment, a process we originated the patent on, uses a computer controlled chamber to slowly lower your firearm under ultra-cold temperatures of -300°F. We maintain equal temperature changes at the thickest part of the metal structure along with ambient temperatures to lock in our proven results. We’re able to rearrange molecular structures inside your gun barrel to create permanent irreversible changes that ensure uneven stress patterns are relieved.

-300°F is just above the boiling point of liquid nitrogen where liquid becomes a gas and is completely SAFE for your firearm. Unlike copy cat processes that dunk your metals in liquid nitrogen, or fail to use our proprietary procedures, our process will NOT create thermal shock. Have you seen what happens when you drop a frozen ice cube into a scalding hot cup of coffee? The cracking that occurs will never happen with our process, but it could happen if you use inferior treatment options.
Why don't I get some liquid nitrogen and do it myself?
You can't just dunk a firearm barrel into liquid nitrogen. You need the computer controlled process which we originated the patent on to ensure the results and safety of your firearm.
What if I find it cheaper somewhere else? 
Competitors may take risks with your barrel, they don't know our process, we have perfected it since the early nineties and have been in business since 1966, and treated over 500,000 firearm barrels since our inception.
Privacy Policy | Terms & Conditions | Contact Us

2018 © Cryo Accurizing, All Rights Reserved
Powered By ClickFunnels.com